Envisiontec Perfactory

		Envisiontec Perfactory
Home Company Products Services News Contacts Summary		Perfactory3 XGA Desktop System Rapid Prototyping & Discret Manufacturing The Perfactory3 XGA Desktop (DT) System is perfectly suited for reproducing CAD designs created with Gemvision’s Matrix software in a castable resin. With its large envelope, multiple pieces can be created in just one build. Perfactory's advanced technology allows thin-wall parts and even hollow parts to be produced. The high rate of build speed means a typical build can produce five rings in five hours making it the ultimate medium-volume CAM solution. Technology The Perfactory3 creates three-dimensional resin models by projecting a sequence of digital masks onto a photo curable polymer utilizing Texas Instruments’ DLP (Digital Light Process) chip which allows for high build speeds with excellent reproduction of detail and unparalleled reliability. Ease of Use The compact and mobile Perfactory is designed to connect directly to a PC workstation or be integrated into a network. System installation, operation and maintenance is as easy as using a desktop printer. Its small footprint is only 18” x 31” x 18” (L x H x D), and it weighs just 55 lbs. Maintenance Minimal moving parts make for maximum performance and minimal maintenance. Routine maintenance is easily performed by the operator. Castable Resin While there are other wax-based materials on the market, they tend to be far more brittle and harder to finish when compared with the models built on the Perfactory system using the PIC-100 resin. The PIC-100 liquid photopolymer is suitable for secondary operations such as sanding and polishing. The resin melts into a liquid wax-like material during investment casting without the need for any high temperature burnout cycles. Although the casting process is not identical to that used for wax, the burnout and casting techniques required also work well for traditional wax. Cost The Perfactory3 DT System is cost effective to purchase and operate. The cost includes everything you need, from training and a year’s worth of support to materials & shipping costs. Minimal consumable components make this a low-cost, high output solution (CHF 4.00-7.00 per model in consumables). All informations on this page are subject to change without advance notice

Home

Company

Products

Services

News

Contacts

Summary

Perfactory3 XGA Desktop System
Rapid Prototyping & Discret Manufacturing

The Perfactory3 XGA Desktop (DT) System is perfectly suited for reproducing CAD designs created with Gemvision’s Matrix software in a castable resin. With its large envelope, multiple pieces can be created in just one build. Perfactory's advanced technology allows thin-wall parts and even hollow parts to be produced. The high rate of build speed means a typical build can produce five rings in five hours making it the ultimate medium-volume CAM solution.

Technology
The Perfactory3 creates three-dimensional resin models by projecting a sequence of digital masks onto a photo curable polymer utilizing Texas Instruments’ DLP (Digital Light Process) chip which allows for high build speeds with excellent reproduction of detail and unparalleled reliability.

Ease of Use
The compact and mobile Perfactory is designed to connect directly to a PC workstation or be integrated into a network. System installation, operation and maintenance is as easy as using a desktop printer. Its small footprint is only 18” x 31” x 18” (L x H x D), and it weighs just 55 lbs.

Maintenance
Minimal moving parts make for maximum performance and minimal maintenance. Routine maintenance is easily performed by the operator.

Castable Resin
While there are other wax-based materials on the market, they tend to be far more brittle and harder to finish when compared with the models built on the Perfactory system using the PIC-100 resin. The PIC-100 liquid photopolymer is suitable for secondary operations such as sanding and polishing. The resin melts into a liquid wax-like material during investment casting without the need for any high temperature burnout cycles. Although the casting process is not identical to that used for wax, the burnout and casting techniques required also work well for traditional wax.

Cost
The Perfactory3 DT System is cost effective to purchase and operate. The cost includes everything you need, from training and a year’s worth of support to materials & shipping costs. Minimal consumable components make this a low-cost, high output solution (CHF 4.00-7.00 per model in consumables).

All informations on this page are subject to change without advance notice